Drive & control
Starline In-roller motors; the most reliable drive system
Starline has an own range of innovative in-roller motors for all applications.
A Roldeck with an in-roller motor is ideally suited to existing pools or in locations where high groundwater table levels are a problem. A separate motor pit is unnecessary and only a modest roller axle is needed.
The stainless steel housing of the Starline in-roller motor is filled with nitrogen to prevent corrosion by condensation. The watertightness is monitored continuously by a built-in pressure sensor.
The range of Starline in-roller motors has 3 models:
100 Nm: suitable for pools up to 10 x 5 m
150 Nm: suitable for pools up to 15 x 7.5 m
500 Nm: suitable for pools up to 30 x 10 m
The in-roller motor has two cabling options; cable through- or along the wall.
Cable through the wall: The cable is passed through the wall using a wall duct. The motor-side support is equipped with a freewheel device that can be removed. This makes it possible to always open or close the Roldeck manually which guarantees safety at all times.
Cable along the wall: The cable passes out through the pool wall in a stainless steel cable duct, which is mounted on the motor support. The cable is laid along the inside of the pool and covered with a stainless steel profile which does not adversely affect the finishing or the dimensions of the Roldeck.
Roldeck Control
The Starline RD2006 control panel operates the Roldeck with just a few buttons.
It has the same design as all the other Starline controls. The RD2006 control comes with connections for the child-safety lock, jetstream, filter pump, pressure measurement, single-button operation and an extensive error code diagnosis system which makes malfunctions easier to recognise for servicing.
The RD2006 Roldeck controlpanel work via a "plug and play" principal with several optional modules, such as a remote control, a separate programming unit, automatic lid control and a electronic brake module for the large 500 Nm in-roller motor. |
